Two Way Rod Seals of Jdma, Applied to Hydraulic Cylinder

• Material: Elastomeric Polymer, PTFE, Upe, PU
• Application: Marine, Hydro-Turbine, Pump
• Type: Shaft Seal
• Shape: Two Way Seal
• Other Optional Materials: PTFE, Upe, PU, Laminated Composites, FRP, Carbon
• Trademark: INDRON
• Origin: China
• Production Capacity: 50000

Product Description

INDRON^® seals and gaskets are more durable than ordinary bearing materials under various operation medium conditions, such as dry friction, water lubrication (clear water or water containing sand and shale), oil lubrication and grease lubrication, etc. and even the operation condition of impulsive loads. INDRON® oil and gas sealing material has excellent mechanical properties, good rigidity, toughness, hardness, wear resistance, small permanent compression set, excellent high and low temperature resistance, and excellent aging resistance. It is mainly used to prevent lubricating oil from leaking out or oil mist overflowing in the oil tank.
Various materials are available, including ELASTOMERIC POLYMER, PTFE, UPE, PU, LAMINATED COMPOSITES, FRP, CARBON, GRAPHITE, RUBBER, NBR, FKM, VITON, TPE. 

Performance	Parameters
Density	(1.90~2.00)g/cm³
Shore D Hardness	67.0~75.0
Glass Transition Temperature	≥250ºC
Tensile Strength	≥38Mpa
Bending Strength	≥80Mpa
Compressive Strength	≥70Mpa
Impact Strength	≥7.0KJ/m²
Coefficent of Friction	0.12~0.18
Volume Resistivity	≤50